Toyota RAV4: Installation with LATCH system (second outside seats only)
Fold the seatback while pulling the lever. Return the seatback and secure it at the 1st lock position (most upright position). Adjust the seatback to the 7th lock position.
1st lock position
7th lock position
Type A
Latch the hooks of the lower straps onto the LATCH anchors. The bars are installed in the clearance between the seat cushion and seatback. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. For owners in Canada:
The symbol on a child restraint system indicates the presence of a lower connector system.
Type B
Latch the buckles onto the LATCH anchors. The bars are installed in the clearance between the seat cushion and seatback. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. For owners in Canada:
The symbol on a child restraint system indicates the presence of a lower connector system.
Installing child restraints
Follow the child restraint system manufacturer's instructions. Firmly
secure child restraints to the outside rear seats using the LATCH
anchors or a seat belt. Attach the top tether strap when insta ...
Installing child restraints using a seat belt (child restraint lock function
belt)
■ Rear facing - Infant seat/convertible seat
Place the child seat on the rear
seat facing the rear of the vehicle.
Run the seat belt through the
child seat and insert the plate
into the ...
See also:
“Child-protection” rear doors
1- Lock. 2- Unlock.
Child protection helps prevent the rear doors from being opened accidentally
from the inside. If the lever is set to the locked position, the rear doors cannot
be opened usi ...
Electronic key battery depletion
●The standard battery life is 1 to 2 years. (The battery becomes depleted
even if the electronic key is not used.) If the smart key system or the
wireless remote control function does not oper ...
To select a track from its beginning
Turn the “TUNE/TRACK/CH” dial clockwise
to skip to the beginning of the next
track/file. Each time the dial is turned, the
indicated track/file number will increase.
Turn the “TUNE/TRAC ...
