Subaru Forester: Initialization of power window (type A)
If the vehicle’s battery is disconnected due to situations such as battery or fuse replacement, the following functions are deactivated.
- One-touch auto up/down function
- Anti-entrapment function
Initialize the power window using the following procedure to reactivate these functions.
1. Close the driver’s door.
2. Turn the ignition switch to the “ON” position.
3. Open the driver’s side window halfway by pushing down the power window switch.
4. Pull up the power window switch and close the window completely. Continue pulling up the switch for approximately 1 second after the window is closed completely.
Power window operation by passengers
Each passenger window can be controlled
by the power window switch located on
the door.
To open:
Push the switch down and hold it until the
window reaches the desired position.
To close:
P ...
Rear gate
The rear gate can be locked and unlocked
using any of the following systems.
- Power door locking switch: Refer to
“Power door locking switches”.
- Remote keyless entry system: Refer to
...
See also:
Ignition Switch
Vehicle Without
Keyless Start System
The ignition switch has the following four positions:
LOCK
This is the normal parking position. It is the only position in which the key
can be removed. It ...
Accessing The Storage Bin
NOTE: The spring-loaded latches that retain the
storage bin cover to the cargo load floor should not be
used as cargo tie-downs.
1. Flip the spring-loaded latch pull-loops up.
Cargo Load Floor ...
Headlamp levelling (halogen only)
Headlamp levelling (halogen only)
Use the headlamp levelling control to account
for vehicle loading changes.
...
