Toyota RAV4: Initialization - Using the “SET UP” menu (“Bluetooth” menu) - Using the audio system - Interior features - Toyota RAV4 Owner's ManualToyota RAV4: Initialization

Select “Initialize” using ● Initializing the sound settings.

● Initializing the sound settings

Select “Sound setting” using press (YES). and press For details about sound settings (YES). For details about sound settings

● Initializing the device information

Select “Car Device Info” using and press (YES). and press Automatic connection of a portable device, automatic connection confirmation (YES).

Automatic connection of a portable device, automatic connection confirmation display and the passkey will be initialized.

● Initializing the all settings

Select “All Initialize” using press (YES). and press ■The number of Bluetooth® device that can be registered (YES).

■The number of Bluetooth® device that can be registered

Up to 5 Bluetooth® devices can be registered in the system.

    Setting the automatic connection confirmation display to on or off
    If the “Display Setting” is set to on, the portable player connection status will be displayed when the engine switch is turned to the “ACC” or “ON” position. 1 Select “Display Settin ...

    Using the “SET UP” menu (“Phone” menu)
    ■ Functions and operation procedures To enter the menu of each function, press and follow the steps below using ● Adding a new phone number 1. “Phone” → 2. “Phonebook” ...

    See also:

    Moving near a projecting object
    The predicted course lines A do not touch the object in the display. However, the vehicle may hit the object if it projects over the actual moving course. There may be a small distance visi ...

    Jump starting
    WARNING: The gas produced by the battery during the jump-start operation is highly explosive. If these instructions are not followed exactly, serious personal injury and damage to the vehi ...

    License plate light
    1. Remove the mounting screws using a Phillips screwdriver. 2. Remove the cover and lens. 3. Pull the bulb out of the socket. 4. Install a new bulb. 5. Reinstall the lens and cover. 6. Tighte ...