Subaru Forester: Illumination brightness control
Illumination brightness control
The brightness of clock display, audio, air
conditioner, information display and instrument
panel illumination dims when the
light switch is in the “
” or “
”
positions. You can adjust brightness of
the instrument panel illumination for better
visibility.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
NOTE
When the control dial is turned fully
upward, the illumination brightness
becomes the maximum and the automatic
dimming function does not work
at all.
Turn signal lever
Turn signal lever
To activate the right turn signal, push the
turn signal lever up. To activate the left
turn signal, push the turn signal lever
down. When the turn is finished, the lever
w ...
Front fog light switch (if equipped)
Front fog light switch (if equipped)
The front fog lights operate only when the
low beam headlights are illuminated.
However, the front fog lights turn off when
the headlights are switched t ...
See also:
Accessory Socket (if equipped)
12-volt accessory sockets are located both on the center console and on the left
side of the luggage compartment. Depending on the specification, there are two sockets
on the center console. E ...
How to Add Coolant to the Coolant Surge Tank
Notice: This vehicle has a specific coolant fill procedure. Failure to follow
this procedure could cause the engine to overheat and be severely damaged.
If you have not found a problem yet, check t ...
Blizzard Conditions
Being stuck in snow can be a serious situation. Stay with the vehicle unless
there is help nearby. If possible, use the Roadside Assistance Program (U.S. and
Canada) on page 13‑7 or Roadside ...
