Hyundai Tucson: Power steering fluid level
The power steering fluid level should be checked regularly. To check the power steering fluid level, be sure the engine is "OFF", then check to make certain that the power steering fluid level is between the "MAX" and "MIN" level markings on the fluid reservoir.
NOTE: Grinding noise from the power steering pump may be heard immediately after the engine is started in extremely cold conditions (below - 4В°F). If the noise stops during warm up, there is no abnormal function in the system. It is due to a power steering fluid characteristic in extremely cold conditions.
Recommended Fluid
Use PSF-3 type fluid
NOTE: Do not start the engine when the power steering oil reservoir is empty.
POWER STEERING HOSES
It is suggested that you check the power steering hose connections for fluid leakage at those intervals specified in the vehicle maintenance schedule in Section 5. The power steering hoses should be replaced if there is severe surface cracking, pulling, scuffing or worn spots. Deterioration of the hose could cause premature failure.
FOR MORE INFORMATION ABOUT YOUR HYUNDAI
If you desire additional information about maintaining and servicing your Hyundai, you may purchase a factory Shop Manual at your Hyundai dealer's parts department. This is the same manual used by dealership technicians and while it is highly technical it can be useful in obtaining a better understanding of your car and how it works.
Checking electric cooling fans
WARNING: The cooling fan is controlled by engine coolant temperature and may sometimes operate even when the engine is not running. Use extreme caution when working near the blades of the co ...Headlight aiming adjustment
Before performing aiming adjustment, make sure of the following. 1. Keep all tires inflated to the correct pressure. 2. Place the vehicle on level ground and press the front bumper & rear ...See also:
Additional Maintenance and Care
Your vehicle is an important investment and caring for it properly may help to
avoid future costly repairs. To maintain vehicle performance, additional maintenance
services may be required. It is ...
Smooth cornering
Avoid braking or gear changing in corners,
especially when roads are wet. Ideally, corners
should always be taken under gentle acceleration.
If you follow these suggestions, tire wear
will be ...
Air conditioning system
Air Conditioning Switch (If installed)
The air conditioning is turned on or off by
pushing the A/C button on the heating/air conditioning
control panel.
Air Conditioning Operation for Cool ...