Subaru Forester: Hill start assist system (MT models) - Maintenance and service - Subaru Forester Owner's ManualSubaru Forester: Hill start assist system (MT models)

Ensure that the Hill start assist system operates properly under the following circumstances:
1. Stop the vehicle on an uphill grade by depressing the brake pedal and clutch pedal, with the engine running.

2. Make sure that the vehicle does not move backward even after the brake pedal is released.

3. Then make sure the vehicle starts climbing the grade by following the normal starting procedures.

If the Hill start assist system does not operate as described above, contact with your SUBARU dealer.

    Checking the clutch pedal free play
    1) 0.16 – 0.43 in (4.0 – 11.0 mm) Lightly press the clutch pedal down with your finger until you feel resistance, and check the free play. If the free play is not within proper specifica ...

    Replacement of brake pad and lining
    The front disc brake and the rear disc brake have audible wear indicators on the brake pads. If the brake pads wear close to their service limit, the wear indicator makes a very audible scra ...

    See also:

    Removing and storing the cargo net
    Press the release buttons on the locks on the straps and pull out a small section of the strap. Press in the catches on the straps' hooks and remove the hooks from the eyelet. Fold u ...

    SCAN (only when connecting USB storage device)
    Scan is operated in the same way a CD is played. For details, refer to “Scan (type A, B and C audio)”. NOTE When an iPod® is connected, you cannot select the SCAN mode. ...

    When to contact your Toyota dealer
    In the following cases, contact your Toyota dealer as soon as possible. ●Any of the SRS airbags have been inflated. ●The front of the vehicle is damaged or deformed, or was involved i ...