Hyundai Tucson: Hazard warning system
The hazard warning system should be used whenever you find it necessary to stop the car in a hazardous location. When you must make such an emergency stop, always pull off the road as far as possible. The hazard warning lights are turned on by pushing in the hazard switch. This causes all turn signal lights to blink. The hazard warning lights will operate even though the key is not in the ignition. To turn the hazard warning lights off, push the switch a second time.
Front fog light switch
(If installed) To turn on the front fog lights, push the switch. They will light when the headlight switch is in the second position and the ignition key is in the "ON" position. N ...Window defroster switch
Windshield wiper Blade De-icer (If installed) The windshield wiper blade de-icer is turned on by pushing in the switch. To turn the de-icer off, push the switch a second time. The windshield ...See also:
Indicator lamps
Turn-signal indicator lamps/Hazard
warning indicator lamps
These indicator lamps blink on and off when a turn-signal lamp is operating.
NOTE:
● If the blinking is too fast, the cause may b ...
Lights
Switching the daytime running lamps on/ off
This function is not available in Canada. If you have activated the Daytime Running
Lights: function and the light switch is in the c or à positio ...
Adjusting the steering wheel manually
elease lever
To adjust the steering wheel height
To adjust the steering wheel position (fore-and-aft adjustment)
Push release lever 1 down completely. The steering column is unlocked.
...