Mercedes-Benz GLK-Class: Hazard warning lamps
The hazard warning lamps automatically switch on if:
- an air bag is deployed.
- the vehicle is slowed down severely from a speed of over 45 mph(70 km/h) and comes to a halt.
- To switch on the hazard warning lamps: press button 1.
All turn signals flash. If you now switch on a turn signal using the combination switch, only the turn signal lamp on the corresponding side of the vehicle will flash. - To switch off the hazard warning lamps: press button 1.
The hazard warning lamps are deactivated automatically if the vehicle returns to a speed of over 6 mph(10 km/h) after a full application of the brakes.
The hazard warning lamps still operate if the ignition is switched off.
High-beam flasher
To switch on: turn the SmartKey in the ignition lock to position 1 or
2 or start the engine.
Pull the combination switch in the direction of arrow 3.
...
Active light function
The active light function is a system that moves the headlamps according to the
steering movements of the front wheels. In this way, relevant areas remain illuminated
while driving. This allows ...
See also:
Stop the vehicle immediately
The following warning indicates the possibility of damage to the vehicle
that may lead to an accident. Immediately stop the vehicle in a
safe place and contact your Toyota dealer.
...
Erasing warning messages
When a low tire pressure warning message has
been displayed, and the tire pressure warning
light has come on:
1. Use a tire pressure gauge to check the
inflation pressure of all four tires.
2. ...
Operation
The SRS side airbag and SRS curtain
airbag can function only when the ignition
switch is in the “ON” position.
The driver’s and front passenger’s SRS
side airbags and SRS curtain airb ...
