Jeep Liberty: Front Turn Signal And Front Side Marker Lamp
1. Turn the steering wheel all the way to the right to access the left front turn signal or side marker. Turn the steering wheel all the way to the left to access the right front turn signal or side marker.
2. Remove three push-pins from the wheel-well liner.
3. Gently flex the wheel-well liner forward to access the bulb.
4. Rotate the bulb’s socket counterclockwise, and remove the bulb and socket assembly from the housing.
5. Pull the bulb out of the socket and insert the replacement bulb.
6. Install the bulb and socket assembly into the housing, and rotate the socket clockwise to lock it in place.
7. Reposition the wheel-well liner and install the push-pins.
Headlamp
1. Open the hood. 2. Reach behind the headlamp housing to access the headlamp bulb lock ring. 3. Firmly grasp the lock ring and rotate it counterclockwise to unlock it. 4. Remove the bulb and c ...Front Fog Lamp
1. Open the hood. 2. Reach behind the headlamp housing to access the bulb. 3. Rotate the bulb’s socket counterclockwise, and remove the bulb and socket assembly from the fog lamp housing. 4. ...See also:
Airbags - advanced supplemental restraint system
(1) Driver’s front
air bag (2) Passenger’s front air bag (3) Side air bag* (4) Curtain air bag* * :
if equipped
WARNING Even in vehicles with air bags, you and your passengers must always we ...
Windshield wipers/washers
Windshield wipers and washers
1 Rain sensor* on/off
2 Thumb wheel sensitivity/frequency
CAUTION
• Use ample washer fluid when washing
the windshield. The windshield should
be thoroughly w ...
Special Additives
The manufacturer strongly recommends against the addition
of any additives to the transmission. The only
exception to this policy is the use of special dyes to aid in
detecting fluid leaks. The ...