Mercedes-Benz GLK-Class: Tail lamp
- Switch off the lights.
- Open the cargo compartment.
- Open the side trim panel ().
- Pull out connector 2.
- Press retaining lugs 1 simultaneously in the direction of the arrow and pull the bulb holder out.
Bulb holder without LED turn signal lamp
- Tail lamp/brake lamp
- Turn signals
- Backup lamp
- ear fog lamp/tail lamp
- Side marker lamp
- Lightly press the corresponding bulb into the holder, turn it counter-clockwise and remove it from the bulb holder.
- Insert the corresponding new bulb into the bulb holder and turn it clockwise.
- Attach the bulb holder and press firmly. The retaining lugs on the bulb holder engage audibly.
- Insert the connector.
- Close the side trim panel ().
Opening and closing the side trim panels
You must open the side trim panel in the cargo compartment before you can change the bulbs in the tail lamps. Left-hand side trim panel Right-hand side trim panel To open: turn release kno ...License plate lamps
Switch off the lights. Open the tailgate. Press lug 2 of license plate lamp 1 in the direction of the arrow and remove license plate lamp lens 1. Remove license plate lamp lens 1. Repl ...See also:
Towing your vehicle
When towing your vehicle, all State (Provincial in
Canada) and local regulations for towing must
be followed. Incorrect towing equipment could
damage your vehicle. Towing instructions are
avai ...
Flash-to-pass
Pull toward you slightly to activate
and release to deactivate.
...
Hitch ball
Choose a hitch ball of the proper size and
weight rating for your trailer:
- The required hitch ball size is stamped on
most trailer couplers. Most hitch balls also
have the size printed on to ...