Jeep Liberty: Seat Belts
Inspect the belt system periodically, checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system.
Front seat belt assemblies must be replaced after a collision. Rear seat belt assemblies must be replaced after a collision if they have been damaged (i.e., bent retractor, torn webbing, etc.). If there is any question regarding belt or retractor condition, replace the belt.
Air Bag Warning Light
The light should come on and remain on for four to eight seconds as a bulb check when the ignition switch is first turned ON. If the light is not lit during starting, see your authorized dealer. ...See also:
Wiper and washer switch
Windscreen wipers
The windscreen wipers can be operated with the ignition switch in the “ON” or
“ACC” position. If the blades are frozen to the windscreen or rear window, do not
operate t ...
Storage spaces
Storage spaces
1 Compartment in door panel
2 Storage pocket on the front edge of the front seat cushions
3 Glove compartment
4 Storage compartment, 12-volt socket and AUX input/USB connector
5 ...
Color code
Make sure you have the right color. The color
code number is stated on the model plate. ...