Subaru Forester: Entering the vehicle while it is running via remote
start
1. Unlock the vehicle doors using the
keyless entry system. If the vehicle’s
doors are unlocked manually using the
key, the vehicle’s alarm system will trigger
and the remote engine start system will
turn off. Inserting the key into the ignition
switch and turning it to the “ON” position or
pressing the unlock button “
” on the
remote keyless entry transmitter will disarm
the alarm system. Refer to “Alarm
system”.
2. Enter the vehicle. Do not depress the brake pedal.
3. Insert the key into the ignition switch and turn to the “ON” position. If the ignition switch is accidentally turned to the “START” position, the system’s “starter anti-grind” feature will prevent the starter from re-cranking.
4. Depress the brake pedal. The remote starter disengages, the vehicle’s power window features are re-enabled and the vehicle will operate normally.
Remote start safety features
For safety and security reasons, the
system will fail to start and beep the horn
twice or shut down the engine during
remote start operation if any of the
following conditions occur.
- The br ...
Entering the vehicle following remote engine start
shutdown
An alarm trigger may occur if the vehicle is
opened by the remote keyless entry
transmitter within a few seconds immediately
following remote engine start shutdown. ...
See also:
Disabling dsc
Safety may be reduced by
inappropriately disabling DSC. In the
majority of driving situations, and
particularly on-road, it is
recommended that you do not disable
DSC.
In some driving condition ...
Attaching the roof carrier
Secure the roof carrier to the roof rails.
Observe the manufacturer's installation instructions.
...
Power Liftgate Operation
On vehicles with a power liftgate, the vehicle must be in P (Park) to use the
power feature. The taillamps flash when the power liftgate moves.
Notice: If you open the liftgate without checking f ...
