Subaru Forester: Engine oil
NOTE
- The engine oil consumption rate is
not stabilized, and therefore cannot be
determined until the vehicle has traveled
at least several thousand miles
(kilometers). Even after break-in, when
the vehicle is used under severe driving
conditions such as those mentioned
in the Warranty and Maintenance
Booklet, engine oil is consumed
or deteriorated more quickly than under
normal driving conditions. If you
drive your vehicle under these severe
conditions, you should check the oil
level at least at every second fuel fill-up
time, and change the oil more frequently.
Please refer to the Warranty and Maintenance Booklet for more details.
- If the oil consumption rate seems abnormally high after the break-in period, for example more than 1 quart per 1,200 miles or 1 liter per 2,000 kilometers, contact your SUBARU dealer.
Turbo models
Turbo models 1) Power steering fluid reservoir 2) Differential gear oil level gauge (AT) 3) Clutch fluid reservoir 4) Automatic transmission fluid level gauge 5) Brake fluid reservoir 6) ...Checking the oil level
Check the engine oil level at each fuel stop. 1. Park the vehicle on a level surface and stop the engine. Turbo models Non-turbo models 2. Pull out the level gauge, wipe it clean, and in ...See also:
Refueling
1. Park with the driver’s side closest
to the service station pump.
2. Open the fuel fill door by pulling
on the handle located under the
lower left corner of the dashboard.
3. Remove th ...
A/V-AUX socket, 12-volt socket
This A/V-AUX socket is used to connect external
devices to the RSE system. When connecting
an external device, always follow the
instructions provided with the device. Devices
connected throug ...
Opening and closing the hood
1 Pull the lever located under the left side of
the dash to release the hood lock. An information
symbol will illuminate when the
hood is open.
2 Lift the hood slightly. Press the release
c ...