Toyota RAV4: Engine (ignition) switch (vehicles without smart key system)
■ Starting the engine
1 Check that the parking brake is set.
2 Check that the shift lever is set in P.
3 Sit in the driver’s seat and firmly depress the brake pedal.
4 Turn the engine switch to the “START” position to start the
engine.
■ Engine (ignition) switch
1 “LOCK”
The steering wheel is locked
and the key can be removed.
(The key can be removed only
when the shift lever is in P.)
2 “ACC”
Some electrical components
such as the audio system can
be used.
3 “ON”
All electrical components can
be used.
4 “START”
For starting the engine.
■Turning the key from “ACC” to “LOCK”
1 Shift the shift lever to P.
2 Push in the key and turn to the
“LOCK” position.
■Steering lock release
When starting the engine, the engine switch may seem stuck in the “LOCK” position. To free it, turn the key while turning the steering wheel slightly in either direction.
■If the engine does not start
The engine immobilizer system may not have been deactivated.
■Key reminder function
A buzzer sounds if the driver’s door is opened, while the engine switch is in the “LOCK” or “ACC” position to remind you to remove the key.
CAUTION
■When starting the engine
Always start the engine while sitting in the driver's seat. Do not press the
accelerator while starting the engine under any circumstances.
Doing so may cause an accident resulting in death or serious injury.
■Caution when driving
Do not turn the engine switch to the “LOCK” position while driving. If, in an
emergency, you must turn the engine off while the vehicle is moving, turn the
key only to the “ACC” position.
■To prevent battery discharge
Do not leave the key in the “ACC” or “ON” position for a long period if the
engine is not running.
■When starting the engine
●Do not crank for more than 30 seconds at a time. This may overheat the
starter and wiring systems.
●Do not race a cold engine.
●If the engine becomes difficult to start or stalls frequently, have the engine
checked immediately.
Engine (ignition) switch (vehicles with smart key system)
Performing the following operations when carrying the electronic key on your person starts the engine or changes “ENGINE START STOP” switch modes. ■ Starting the engine The engine can be ...Automatic transmission
Select a shift position appropriate for the driving conditions. ■ Shifting the shift lever 4-speed models 5-speed models Vehicles without smart key system: While the engine switch is ...See also:
Using the Transmission
5-Speed Automatic
Transmission
D: 5-speed automatic transmission mode. 4: 4-speed automatic transmission
mode.
The 4-speed mode is suitable for the following driving conditions:
• Driving o ...
Brake fluid level
If you notice that the brake fluid level in the brake fluid reservoir has fallen
to the MIN mark or less, check the brake system immediately for leaks. Also check
the thickness of the brake lin ...
Correct driving posture
1 Sit upright and well back in
the seat.
2 Adjust the position of the
seat forward or backward to
ensure the pedals can be
reached and easily
depressed to the extent
required.
3 Adjust the s ...