Hyundai Tucson: Heating and cooling control
1. Side Defroster Nozzle
2. Side Ventilators
3. Windshield Defroster Nozzles
4. Center Ventilators
CENTER VENTILATOR
The center ventilators are located in the middle
of the dashboard. To change the direction of the
air flow, move the knob in the center of the vent
up-and-down and side-to-side. The vents are
opened when the vent knob is moved to "
"
position. The vents are closed when the vent
knob is moved to "
". Keep these vents
clear
of any obstructions.
SIDE VENTILATOR
The side ventilators are located on each side of
the dash board. To change the direction of the
air flow, move the knob in the center of the vent
up-and-down and side-to-side. The vents are
closed when the vent knob is moved to ""
position. The vents are opened when the vent
knob is moved to "". Keep these vents
clear
of any obstructions.
Cruise control
(If installed)
The cruise control system provides automatic
speed control for your comfort when driving on
straight, open freeways, toll roads, or other
noncongested highways. This system is ...
Heating and ventilation
There are three controls and two switches for
the heating and cooling system. They are:
1. Air flow control.
2. Fan speed control.
3. Temperature control.
4. Air intake control switch.
5 ...
See also:
Restricting the shift range
X Press the selector lever to the left towards D–.
The automatic transmission shifts down one gear and restricts the shift range
to the relevant gear.
If the engine exceeds the maximum engine ...
Brake System
In order to assure brake system performance, all brake
system components should be inspected periodically.
Refer to the “Maintenance Schedule” for the proper
maintenance intervals.
WARNING! ...
Defrosting or defogging
Defrosting or defogging
To direct warm air to the windshield and
front door windows:
1. Set the airflow control dial to the “”
position.
2. Set the temperature control dial to the
red ...
