Subaru Forester: ECO gauge (models with type A combination meter)
The unit displayed varies depending on the model.
The ECO gauge shows the difference between the average rate of fuel consumption since the trip meter was last reset and the current rate of fuel consumption.
The ECO gauge indicates the current fuel efficiency as shown in the following chart.
NOTE
- The ECO gauge shows only an
approximate indication of fuel efficiency.
- After resetting the trip meter, the average rate of fuel consumption is not shown until driving 0.6 mile (1 km).
Until that time, the ECO gauge does not operate.
Temperature gauge (models with type A combination meter)
1) Normal operating range The temperature gauge shows engine coolant temperature when the ignition switch is in the “ON” position. The coolant temperature will vary in accordance with ...Warning and indicator lights
Several of the warning and indicator lights illuminate momentarily and then turn off when the ignition switch is initially turned to the “ON” position. This permits checking the operation ...See also:
Maximum tire pressure
WARNING
Never exceed the maximum tire inflation pressure. Follow recommended tire inflation
pressures.
Do not underinflate tires. Underinflated tires wear excessively and/or unevenly,
adver ...
Luggage hooks (if so equipped)
Luggage hooks (if so equipped)
- Always make sure that the luggage
is properly secured. Use the suitable
ropes and hooks.
- Unsecured luggage can become
dangerous in an accident or sudde ...
Warranties and maintenance
SUBARU warranties do not apply to
vehicle damage or malfunction caused
by trailer towing. If you use your vehicle to
tow a trailer, more frequent maintenance
will be required due to the additi ...