Volvo XC60: Driver Alert Control (DAC)– introduction - Driver Alert System - Comfort and driving pleasure - Volvo XC60 Owner's ManualVolvo XC60: Driver Alert Control (DAC)– introduction

This function is intended to alert the driver if

This function is intended to alert the driver if his/her driving becomes erratic, such as if the driver is distracted or fatigued.

NOTE
The camera has certain limitations, see page 159.

A camera monitors the painted lines marking the lane in which the vehicle is traveling and compares the direction of the road with the driver’s movements of the steering wheel. The driver is alerted if the vehicle does not follow the lane smoothly.

DAC is designed to help detect a slowly changing driving pattern. It is primarily intended to be used on main roads and is not meant for use in city traffic.

WARNING
• DAC is not intended to extend the duration of driving. Always plan breaks at regular intervals to help remain alert.
• In certain cases, fatigue may not affect the driver’s behavior. In situations of this type, no warning will be provided.
Therefore, it is important to take breaks at regular intervals, regardless of whether or not DAC has given a warning.

    Introduction
    The Driver Alert System is designed to help a driver who may be becoming fatigued or who is inadvertently leaving the lane. The Driver Alert System consists of two different functions that can ...

    Limitations
    In certain situations, DAC may provide warnings even if the driver’s driving pattern has not become erratic. • if the driver is testing the LDW function • in strong crosswinds • on groo ...

    See also:

    Luggage net
    To keep items from shifting in the cargo area, you can use the four rings located in the cargo area to attach the luggage net. NOTICE Do not put fragile, bulky or an excessive quantity of items i ...

    Useful information
    This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific diffe ...

    Returning to mode I from mode II
    With the remote key fully pressed into the ignition slot, press START/STOP ENGINE briefly. ...