Subaru Forester: Compass zone adjustment - Auto-dimming mirror/compass with HomeLink® (if equipped) - Mirrors - Keys and doors - Subaru Forester Owner's ManualSubaru Forester: Compass zone adjustment

Compass calibration zones
Compass calibration zones

1. Refer to the “Compass calibration zones” map shown above to verify that the compass zone setting is correct for your geographical location.

2. Press and hold the compass display button for 3 seconds until the zone selection comes up (a number will be displayed in the mirror compass window).

3. Press the compass display button repeatedly until the correct zone setting for your location is displayed.

4. Releasing the button for 5 seconds will exit the zone setting mode.

    Photosensors
    Photosensors The mirror has a photosensor attached on both the front and back sides. During nighttime driving, these sensors detect distracting glare from vehicle headlights behind you an ...

    Compass calibration
    1. If a “C” is displayed in the compass window, the compass needs to be calibrated. 2. Drive the vehicle in a circle at 5 mph (8 km/h) or less until the display reads a direction. 3. You ...

    See also:

    Scroll/search forward and back
    Press briefly on (2) to scroll between CD tracks/ audio files or to search for the next available radio station. ...

    Dialing from a call list
    The dialogue below enables you make a call from one of your cell phone's call lists. The user initiates the dialogue by saying: Phone > dial from call list or Phone dial from call list Conti ...

    Lower Anchors and Tethers for CHildren System (LATCH)
    LATCH label location Your vehicle is equipped with special anchor points that are used with the LATCH (Lower Anchors and Tethers for CHildren) system compatible child restraints. This system ...