Nissan Rogue: Checking the tire pressure - Tire pressure - Wheels and tires - Maintenance and do-it-yourself - Nissan Rogue Owner's ManualNissan Rogue: Checking the tire pressure

1. Remove the valve stem cap from the

1. Remove the valve stem cap from the tire.

2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem sideways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage.

3. Remove the gauge.

4. Read the tire pressure on the gauge stem and compare it to the specification shown on the Tire and Loading Information label.

5. Add air to the tire as needed. If too much air is added, press the core of the valve stem briefly with the tip of the gauge stem to release pressure. Recheck the pressure and add or release air as needed.

6. Install the valve stem cap.

7. Check the pressure of all other tires, including the spare.

1: 2WD models

1: 2WD models
2: AWD models
3: AWD models with 18 inch tires

    Tire and Loading Information label
    1 Seating capacity: The maximum number of occupants that can be seated in the vehicle. 2 Vehicle load limit: See “Vehicle loading information” in the “9. Technical and consumer inform ...

    Tire labeling
    Example Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of ...

    See also:

    Lock confirmation
    If you are uncertain whether the vehicle is locked and armed (either by single or double locking), press either the Smart Key lock button or, if Keyless entry is fitted, touch an exterior door han ...

    Engine Cooling System Messages
    A/C OFF DUE TO HIGH ENGINE TEMP This message displays when the engine coolant becomes hotter than the normal operating temperature. To avoid added strain on a hot engine, the air conditioning com ...

    Automatic interior lighting control
    To switch on/off: press the | button. When the automatic interior lighting control is activated, the button is flush with the overhead control panel. The interior lighting automatically switches on ...