Subaru Forester: Checking the brake pedal reserve distance - Brake pedal - Maintenance and service - Subaru Forester Owner's ManualSubaru Forester: Checking the brake pedal reserve distance

Subaru Forester / Subaru Forester Owner's Manual / Maintenance and service / Brake pedal / Checking the brake pedal reserve distance

1) More than 2.56 in (65 mm)

1) More than 2.56 in (65 mm)

Depress the pedal with a force of approximately 66 lbf (294 N, 30 kgf) and measure the distance between the upper surface of the pedal pad and the floor.

When the measurement is smaller than the specification, or when the pedal does not operate smoothly, contact with your SUBARU dealer.

    Checking the brake pedal free play
    1) 0.02 – 0.08 in (0.5 – 2.0 mm) Stop the engine and firmly depress the brake pedal several times. Lightly pull the brake pedal up with one finger to check the free play with a force of l ...

    Clutch pedal (MT models)
    Check the clutch pedal free play and reserve distance according to the maintenance schedule in the “Warranty and Maintenance Booklet”. ...

    See also:

    Remote keyless entry system (if so equipped)
    It is possible to lock/unlock all doors (including the lift gate), and activate the panic alarm by using the keyfob from outside the vehicle. Before locking the doors, make sure the key is not ...

    Playing the FM/AM Radio (EX and EX-L models without navigation system)
    Playing the FM/AM Radio (EX and EX-L models without navigation system) ...

    Electronic Range Select (ERS) Mode
    ERS or manual mode allows for the selection of the range of gear positions. Use this mode when driving downhill or towing a trailer to limit the top gear and vehicle speed. The shift position indi ...