Volvo XC60: Changing
WARNING
Connect and disconnect the positive and
negative cables in the correct sequence.
Maintenance
• Use a screw driver to open the caps or cover and a flashlight to inspect the level. • If necessary, add distilled water. The level should never be above the indicator. • The fluid level ...Removal
Switch off the ignition, remove the remote key from the ignition slot and wait at least 5 minutes before disconnecting the battery so that all information in the vehicle's electrical system ca ...See also:
If the vehicle breaks down
If the vehicle breaks down on the road, move it to the shoulder and use the hazard
warning flashers. Refer to “Hazard warning flasher switch” on page 3-64.
If the engine stops/fails
Vehicle op ...
Catalytic Converter
Catalytic Converter
The purpose of the catalytic converter is to minimize the amount of harmful pollutants
in your vehicle’s exhaust. Use of leaded fuel in vehicles equipped with catalytic
con ...
Seat belt safety
Care should be taken to avoid
contamination of the webbing with
polishes, oils and chemicals, and
particularly battery acid. Cleaning
may safely be carried out using mild
soap and water.
The be ...