Nissan Rogue: Capacities and recommended fuel/lubricants
1: For additional information, see “Engine oil” in the “8. Maintenance and do-it-yourself” section for changing engine oil.
2: For additional information, see “Engine oil and oil filter recommendation” later in this section.
3: Use only Genuine NISSAN CVT Fluid NS-2. Using transmission fluid other than Genuine NISSAN CVT Fluid NS-2 will damage the CVT, which is not covered by the NISSAN new vehicle limited warranty.
4: For hot climates, viscosity SAE 90 is suitable for ambient temperatures above 328F (08C).
5: Available in mainland U.S.A. through a NISSAN dealer.
6: For additional information, see “Vehicle identification” later in this section for air conditioner specification label.
- Fuel recommendation
- Engine oil and oil filter recommendation
- Air conditioning system refrigerant and lubricant recommendations
Fuel recommendation
Use unleaded regular gasoline with an octane
rating of at least 87 AKI (Anti-Knock Index)
number (Research octane number 91).
- Using a fuel other than that specified
could adversely affect ...
See also:
Service messages
Information on the type of service and service intervals (see separate Service
Booklet). You can obtain further information from an authorized Mercedes-Benz Center
or at http://www.mbusa.com (USA ...
English and Metric Unit Conversion
To change the display units between English and metric units, see Driver Information
Center (DIC) on page 5‑23 for more information. ...
Decals
There are various types of decals in the vehicle
whose purpose is to provide important information
in a clear and concise way. The importance
of these decals is explained as follows,
in descen ...
