Mercedes-Benz GLK-Class: Calling up a stored parking position setting
- Turn the SmartKey to position 2 in the ignition lock.
- Adjust the exterior mirror on the frontpassenger side with the corresponding button ().
- Engage reverse gear. The exterior mirror on the front-passenger side moves to the stored parking position.
The exterior mirror on the front-passenger side moves back to its original position:
- as soon as you exceed a speed of 6 mph (10 km/h)
- about ten seconds after you have disengaged reverse gear
- if you press button 1 for the exterior mirror on the driver's side
Setting and storing the parking position
You can position the front-passenger side exterior mirror in such a way that you can see the rear wheel on that side as soon as you engage reverse gear. You can store this position. Make sur ...Memory function
...See also:
Daytime running lamps
Daytime running lamps in Canada
The daytime running lamps function is required by law in Canada. It cannot therefore
be deactivated.
Turn the light switch to
or . With the engine running: d ...
Safety Belt Messages
BUCKLE SEATBELT
This message displays as a reminder when the safety belt is not buckled. ...
Compass calibration
1. If a “C” is displayed in the compass
window, the compass needs to be calibrated.
2. Drive the vehicle in a circle at 5 mph (8
km/h) or less until the display reads a
direction.
3. You ...