Subaru Forester: Bi-level heating
Bi-level heating
This setting allows you to direct air of different temperatures from the instrument panel and foot outlets. The air from the foot outlets is slightly warmer than from the instrument panel outlets.
1. Set the air inlet selection button to the OFF position.
2. Set the airflow control dial to the “
”
position.
3. Set the temperature control dial to the desired temperature level.
4. Set the fan speed control dial to the desired speed.
Setting the temperature control dial fully turned to the red area or blue area decreases the temperature difference between the air from the instrument panel outlets and the air from the foot outlets.
Heating
Heating
To direct warm air toward the floor:
1. Set the air inlet selection button to the
OFF position.
2. Set the airflow control dial to the “”
position.
3. Set the temperature cont ...
Ventilation
Ventilation
To force outside air through the instrument
panel outlets:
1. Set the air inlet selection button to the
OFF position.
2. Set the airflow control dial to the “”
position.
...
See also:
Installing the towing eye
Vehicles with a trailer tow hitch: if possible, secure the towing device on the
trailer tow hitch ().
X Remove the towing eye from the vehicle tool kit ().
WARNING
The exhaust tail pipe may ...
Airbag System
The vehicle has the following airbags:
○ A frontal airbag for the driver.
○ A frontal airbag for the right front passenger.
○ A seat-mounted side impact airbag for the driver.
&# ...
Climate control air filter
The climate control air filter installed behind the glove box filters the dust
or other pollutants that come into the vehicle from the outside through the heating
and air conditioning system. If ...
