Jeep Liberty: Cleaning The Parksense System - Parksense Rear Park Assist — If Equipped - Understanding The Features Of Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: Cleaning The Parksense System

Clean the ParkSense sensors with water, car wash soap and a soft cloth. Do not use rough or hard cloths. Do not scratch or poke the sensors. Otherwise, you could damage the sensors.

    Service The Parksense Rear Park Assist System
    When the ParkSense Rear Park Assist System is malfunctioning, the instrument cluster will actuate a single chime, once per ignition cycle, and it will display the “SERVICE PARK ASSIST SYSTEM ...

    Parksense System Usage Precautions
    NOTE: • Ensure that the rear bumper is free of snow, ice, mud, dirt and debris to keep the ParkSense system operating properly. • Jackhammers, large trucks, and other vibrations could aff ...

    See also:

    Introduction
    Collision Warning with Full Auto-brake and Pedestrian Detection is designed to assist the driver if there is a risk of a collision with a pedestrian, a vehicle ahead that is at a standstill or ...

    Cooling and dehumidifying in high humidity and low temperature weather conditions
    Under certain weather conditions (high relative humidity, low temperatures, etc.) a small amount of water vapor emission from the air outlets may be noticed. This condition is normal and does ...

    Brakes
    Brake Fluid Check the brake fluid level by looking at the reservoir in the engine compartment. Check that the fluid level is between the “MAX” and “MIN” lines. If the brake fluid level i ...