Jeep Liberty: Automatic Unlock Doors On Exit Programming - Power Door Locks - Door Locks - Things To Know Before Starting Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: Automatic Unlock Doors On Exit Programming

The Automatic Unlock Doors On Exit feature can be enabled or disabled as follows:

• For vehicles equipped with the Electronic Vehicle Information Center (EVIC), refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer- Programmable Features)” in “Understanding Your Instrument Panel” for further information.

• For vehicles not equipped with the EVIC, perform the following procedure:

1. Close all doors and place the key in the ignition.

2. Cycle the ignition switch between OFF and ON/RUN and then back to OFF five times, ending up in the ON/RUN position.

3. Press the power door UNLOCK switch to unlock the doors.

4. A single chime will indicate the completion of the programming.

Repeat these steps if you want to return this feature to its previous setting.

NOTE: Use the Automatic Unlock Doors On Exit feature in accordance with local laws.

    Automatic Unlock Doors On Exit
    The doors will unlock automatically on vehicles with power door locks if: 1. The Automatic Unlock Doors On Exit feature is enabled. 2. The transmission is in gear and the vehicle speed returned ...

    Child-Protection Door Lock System — Rear Doors
    To provide a safer environment for small children riding in the rear seats, the rear doors are equipped with a Child-Protection Door Lock system. To use the system, open each rear door, use a fla ...

    See also:

    Problems with the SmartKey
    Problem You cannot lock or unlock the vehicle using the SmartKey. Possible causes/consequences and Solutions The SmartKey battery is discharged or nearly discharged. Try again to lock/unlock th ...

    Installing the spare tire
    The spare tire is designed for emergency use. (See specific instructions under the heading “Wheels and tires” in the “8. Maintenance and do-it-yourself” section.) 1. Clean any mud or d ...

    Pre-heating or pre-cooling the interior of the vehicle
    Before exiting the vehicle, set the temperature controls to the desired setting and operation. After the system starts the vehicle, the heater or air-conditioning will activate and heat or coo ...