Jeep Liberty: Automatic Compass Calibration
This compass is self-calibrating, which eliminates the need to set the compass manually. When the vehicle is new, the compass may appear erratic and the EVIC will display “CAL” until the compass is calibrated. You may also calibrate the compass by completing one or more 360–degree turns (in an area free from large metal or metallic objects) until the “CAL” message displayed in the EVIC turns off. The compass will now function normally.
NOTE: A good calibration requires a level surface and an environment free from large metallic objects such as buildings, bridges, underground cables, railroad tracks, etc.
ECO (Fuel Saver Mode) — If Equipped
The ECO message will display below the outside temperature in the EVIC display (if the audio system is on the ECO indicator will override the audio information display line) if the Display Fuel ...Manual Compass Calibration
If the compass appears erratic and the “CAL” indicator does not appear in the EVIC display, you must put the compass into the Calibration Mode manually as follows: 1. Start the engine. Leave ...See also:
Recent Calls
Use the Recent Calls command to access
outgoing, incoming or missed calls.
“Outgoing” A
Use the Outgoing command to list the outgoing
calls made from the vehicle.
“Incoming” B
Use th ...
TTY Users
OnStar has the ability to communicate to the deaf, hard&-ofhearing, or speech&-impaired
customers while in the vehicle. The available dealer&-installed TTY system can provide
in-vehicl ...
Activating/deactivating
WARNING
Any accumulation of snow and ice should be removed from the rear window before
driving. Visibility could otherwise be impaired, endangering you and others.
The rear window defroster h ...