Subaru Forester: Air inlet selection button
Air inlet selection button
Select airflow by pressing the air inlet selection button.
The selected air inlet setting is shown on the control panel.
(Recirculation): Interior air recirculates inside the passenger compartment.
Use this position when quickly cooling down the passenger compartment or to prevent outside air from entering the passenger compartment. When the recirculation mode is selected, a “” indicator light appears on the display.
(Outside air): Outside air is
drawn
into the passenger compartment. When
the climate control system is operated in
the “AUTO” mode, this position is selected
automatically. (There is one exception:
When the temperature control dial is
turned fully counterclockwise, the recirculation
mode is automatically selected.)
When the outside air mode is selected, a
“” indicator light appears on the
display.
Continued operation in the “” position may fog up the windows.
Switch to the “” position as soon as the outside dusty condition clears.
NOTE
When driving on a dusty road or behind
a vehicle that emits unpleasant exhaust
gases, set the air inlet selection button
to the “” position. From
time to
time, return the air inlet selection
button to the “” position to
draw
outside air into the passenger compartment.
Airflow mode selection button
Airflow mode selection button Select the desired airflow mode by pressing the airflow mode selection button. The selected airflow mode is indicated on the display. Each airflow mode activate ...Type B
Although this climate control system can be used as a full-automatic climate control system, it can also, if desired, be used as a semi-automatic climate control system. When it is used as a fu ...See also:
Information display
Information display
1) Outside temperature indicator
2) Fuel consumption indicator
With the ignition switch in the “ON”
position, the outside temperature and fuel
consumption are indic ...
If your vehicle goes off the edge of the pavement
• If your vehicle goes off the edge of the pavement, slow down, but
avoid severe brake application, ease the vehicle back onto the
pavement only after reducing your speed. Do not turn the steering ...
Changing the Volume
1. Start a dialogue by pressing the Voice Command
button.
2. Say a command (e.g., “Help”).
3. Use the ON/OFF VOLUME rotary knob to adjust the
volume to a comfortable level while the Voice ...