Volvo XC60: Adjusting the set speed
After a speed has been set, it can be increased or decreased by using the or buttons.
1. Press and hold down or until the vehicle reaches the desired speed.
> This will become the set speed when the button is released.
2. Press or for approximately a half second and release the button to increase or decrease vehicle speed by approximately 1 mph (1.6 km/h).
NOTE
• A temporary increase in speed by
pressing the accelerator pedal, for less
than 1 minute (e.g. when passing
another car), does not affect the current
cruise control setting. The vehicle will
automatically return to the previously
set speed when the accelerator pedal is
released.
• If one of the cruise control buttons is
kept depressed for more than approx.
1 minute cruise control is disengaged.
The engine must then be switched off in
order to reset cruise control.
Setting a speed
Use the or buttons set the vehicle's current speed. The set speed is shown in the display. NOTE Cruise control cannot be engaged at speeds below 20 mph (30 km/h). ...Automatic deactivation
Cruise control is automatically deactivated temporarily if one of the following occurs: • If the speed drops below approximately 20 mph (30 km/h). • When the brake pedal is depressed. • I ...See also:
Selecting a magnetic zone
Magnetic zones.
The earth is divided into 15 magnetic zones.
The correct zone must be selected for the compass
to work correctly.
1. Put the ignition in mode II.
2. Using a pen or similar obje ...
Calculating total and load capacities varying seating configurations
Calculate the available load capacity
as shown in the following
examples:
Example 1A
Vehicle capacity weight of the
vehicle is 900 lbs (408 kg), which
is indicated on the vehicle placard
...
Headlights
1. Headlight (high-beam)
2. Front turn signal/park/side marker light
3. Front map light
4. Ceiling light
5. Front fog light
6. Headlight (low-beam)
7. High-mounted stop light
8. Cargo ...