Toyota RAV4: Adjusting the ringtone volume when receiving a call - Making a phone call - Using the audio system - Interior features - Toyota RAV4 Owner's ManualToyota RAV4: Adjusting the ringtone volume when receiving a call

Change the ringtone volume using . . To decrease the volume: Turn counterclockwise. counterclockwise. To increase the volume: Turn clockwise. clockwise.

■When talking on the phone

●Do not talk simultaneously with the other party.
●Keep the volume of the received voice down. Otherwise, voice echo will increase.

■Automatic volume adjustment

When vehicle speed is 50 mph (80 km/h) or more, the volume automatically increases. The volume returns to the previous volume setting when vehicle speed drops to 43 mph (70 km/h) or less.

■Phone call system functions

Depending on the cellular phone, certain functions may not be available.

■Situations where the system may not recognize your voice

●When driving on a rough road
●When driving at high speeds
●When air is blowing out of the vents onto the microphone
●When the air conditioning fan emits a loud noise

    Operations during a call
    ● Transferring a call A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the following methods: a. Operate the ce ...

    Using the “SET UP” menu (“Bluetooth” menu)
    Registering a Bluetooth® device in the system allows the system to function. The following functions can be used for registered devices: ■ Functions and operation procedures 1 Press and sel ...

    See also:

    Obstacle Detection Features
    If the liftgate encounters an obstacle during a power open or close cycle, a warning chime will sound and the liftgate will automatically reverse direction to the full closed or open position. Aft ...

    Steep slopes
    If the vehicle is stationary on a steep, slippery slope, it may begin to slide even with the brakes applied. This is because without wheel rotation, the ABS cannot determine vehicle movement. To ...

    Jacking Instructions
    Jacking Instructions 1) Place the vehicle on level, hard ground. 2) Set the parking brake firmly and shift into “P” (Park) if your vehicle has an automatic transmission, or shift into “R ...