Jeep Liberty: Adding Fluid
Fluid should be added only to fill hole until fluid begins to run out of the hole.
Fluid Level Check
The fluid level should be to the bottom edge of the fill hole (1) when the vehicle is in a level position. 1 — Fill Plug 2 — Drain Plug ...Draining Fluid
First remove the fill plug (1), then the drain plug (2). Recommended tightening torque for the drain and fill plugs is 15–25 ft lbs (20–34 N·m). CAUTION! Do not over-tighten the plugs. You ...See also:
Load and Speed Rating Descriptions
The load and speed rating descriptions
will appear following the size
designation.
They provide two important facts
about the tire. First, the number
designation is its load index. Second,
...
Neutral
Disconnects drive to the wheels. Use the
parking brake while N is selected.
Do not use for vehicle recovery purposes. ...
High/Low Beam Switch
Push the multifunction lever away from you to switch
the headlights to high beam. Pull the multifunction lever
toward you, to switch the headlights back to low beam. ...