Mercedes-Benz GLK-Class: Activating the rear view camera
- Make sure that the SmartKey is in position 2 in the ignition lock.
- Make sure that the "rear view camera" function is selected in COMAND (see the separate operating instructions for COMAND).
- Engage reverse gear. The area behind the vehicle is shown in the COMAND display with guide lines.
View through the camera
The area behind the vehicle is displayed in a mirror-inverted manner, as in the rear-view mirror. WARNING The rear view camera is only an aid and may display obstacles from a distorted pe ...Guide lines in the COMAND display
WARNING Use of rear view camera can be dangerous if you are color-blind or have impaired color vision. Only use rear view camera if you can see and distinguish all colored guidelines shown ...See also:
Follow the correction procedures. (vehicles with smart key system)
After taking the specified steps to correct the suspected problem,
check that the warning light turns off.
*: If the engine does not start when the electronic key is inside the
vehicle, the
e ...
Outside the vehicle
The maintenance items listed here should be
performed from time to time, unless otherwise
specified.
Doors and engine hood: Check that all doors
and the engine hood operate properly. Also
ens ...
Stowing the flat/spare tire
Note: Failure to follow spare tire stowage instructions may result in
failure of cable or loss of spare tire.
If you are stowing a tire that requires reattaching it to the
vehicle with a tether, pe ...