Jeep Liberty: Loose Fuel Filler Cap Message - Adding Fuel - Starting And Operating - Jeep Liberty Owner's ManualJeep Liberty: Loose Fuel Filler Cap Message

If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a gASCAP” message will display in the odometer or a “CHECK GASCAP” message will be displayed in the Electronic Vehicle Information Center (EVIC). Refer to “Electronic Vehicle Information Center (EVIC)” in “Understanding Your Instrument Panel” for further review.

Tighten the fuel filler cap until a “clicking” sound is heard. This is an indication that the fuel filler cap is properly tightened. Refer to “Onboard Diagnostic System” in “Maintaining Your Vehicle” for further information.

    Fuel Filler Cap (Gas Cap)
    The gas cap is located behind the fuel filler door, on the driver’s side of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap has been designed for use with this vehi ...

    See also:

    Windshield Wiper/Washer
    The windshield wiper/washer lever is located on the right side of the steering column. With the ignition in ACC/ACCESSORY or ON/RUN/ START, move the windshield wiper lever to select the wiper sp ...

    Engine
    This spark ignition system complies with the Canadian standard ICES-002. ...

    Fuses
    Your vehicle has three types of fuses, as described below: Main Fuse – The main fuse takes current directly from the battery. Primary Fuses – These fuses are between the main fuse and individu ...