Jeep Liberty: Windshield Washers
To use the washer, pull the windshield wiper/washer control lever toward you and hold it for as long as washer spray is desired (for a maximum of 10 seconds).
If you activate the washer while the wiper control is in the delay range, the wipers will operate in low-speed for two or three wipe cycles after releasing the lever and then resume the intermittent interval previously selected.
If you activate the washer while the wiper control is in the off position, the wipers will operate for two or three wipe cycles and then turn off.
WARNING!
Sudden loss of visibility through the windshield
could lead to a collision. You might not see other
vehicles or other obstacles. To avoid sudden icing of
the windshield during freezing weather, warm the
windshield with defroster before and during windshield
washer use.
Intermittent Wiper System
Use the intermittent wiper system when weather conditions make a single wiping cycle with a variable pause between cycles desirable. Rotate the end of the windshield wiper/washer control lever t ...Mist Feature
Push downward on the windshield wiper/washer control lever to activate a single wipe cycle to clear the windshield of road mist or spray from a passing vehicle. The wipers will continue to operat ...See also:
Vehicle tool kit
The vehicle tool kit can be found in the stowage well under the trunk floor.
X To remove the cargo compartment stowage tray/cover: lift up the floor of the
cargo compartment ().
Remove stowag ...
Deleting registered cell phone from the list
1. Select the “PHONE SETUP” menu.
2. Select the “DELETE” menu.
3. Select a cell phone to be deleted by
operating the “TUNE/TRACK/CH” dial or
saying a voice tag.
4. Select the “CON ...
Windshield Wiper Blades
Clean the rubber edges of the wiper blades and the
windshield periodically with a sponge or soft cloth and a
mild non-abrasive cleaner or use the washer solvent. This
will remove accumulations o ...