Mercedes-Benz GLK-Class: Vehicles with automatic transmission
- Apply the parking brake firmly.
- Shift the transmission to position P.
Using the SmartKey
- Turn the SmartKey to position 0 in the ignition lock and remove it. The immobilizer is activated.
The SmartKey can only be removed if the transmission is in position P.
Using KEYLESS-GO
- Press the Start/Stop button (). The engine stops and all the indicator lamps in the instrument cluster go out.
When the driver's door is closed, this corresponds to SmartKey position 1.
When the driver's door is open, it corresponds to SmartKey position 0 or "SmartKey
removed".
If you attempt to switch off the engine while the selector lever is in a position other than P, a message appears in the multifunction display and you hear a tone.
In an emergency, the engine can be turned off while the vehicle is in motion
by pressing and holding the Start/Stop button for three seconds.
Vehicles with manual transmission
Shift to either first gear or reverse gear R.
Turn the SmartKey to position 0 in the ignition lock and remove it. The
immobilizer is activated.
Apply the parking brake firmly.
...
Parking brake
WARNING
Engaging the parking brake while the vehicle is in motion can cause the rear
wheels to lock up. You could lose control of the vehicle and cause an accident.
In addition, the vehicle& ...
See also:
Opening and closing the bonnet
Opening and closing the bonnet
Opening
1. Pull the bonnet release lever, located in the
left-hand front footwell.
2. Lift the bonnet safety catch lever, located
below the centre point of the bo ...
Heating and defrosting
Heating and defrosting
To direct warm air toward the floor and the
windshield:
1. Set the airflow control dial to the “”
position.
2. Set the temperature control dial to the
most com ...
Floor Mats
WARNING
If a floor mat is the wrong size or is not properly installed, it can interfere
with the pedals. Interference with the pedals can cause unintended acceleration
and/or increased stopping d ...
