Nissan Rogue: Vehicle set-up
1. Park the vehicle on a level surface and apply the parking brake.
2. Start the engine and let it idle until it reaches operating temperature.
3. Turn the engine off and wait more than 10 minutes.
4. Raise and support the vehicle using a suitable floor jack and safety jack stands.
- Place the safety jack stands under the vehicle jack-up points.
- A suitable adapter should be attached to the jack stand saddle.
Make sure the correct lifting and support points are used to avoid vehicle damage.
Changing engine oil and filter
Change the engine oil and filter according to the
maintenance log shown in the NISSAN Service
and Maintenance Guide. ...
Engine oil and filter
1. Oil filler cap
2. Oil drain plug
3. Oil filter
1. Place a large drain pan under the drain plug.
2. Remove the oil filler cap.
3. Remove the drain plug with a wrench and
completely drain ...
See also:
Driving with a trailer
- You should allow for considerably more
stopping distance when towing a trailer.
Avoid sudden braking because it may
result in skidding or jackknifing and loss of
control.
- Avoid abrupt star ...
Voice Command Tree
Refer to “Voice Tree” in this section. ...
Door Latches
Check for positive closing, latching, and locking. ...
