Mitsubishi Outlander: Vehicle labeling
1-Vehicle identification number
The vehicle identification number is stamped on the bulkhead as shown in the illustration.
2-Vehicle information code plate
The vehicle information code plate is riveted as shown in the illustration. The plate shows model code, engine model, transmission model and body colour code, etc. Please use this number when ordering replacement parts.
1- Model code. 2- Engine model code. 3- Transmission model code. 4- Body colour code. 5- Interior code. 6- Option code. 7- Exterior code.
Vehicle identification number plate (RHD vehicles only)
This is stamped on the number plate riveted to the left front corner of the instrument panel pad. It is visible from outside of the vehicle through the windscreen.
Engine number
*: Front of the vehicle.
The engine number is stamped on the engine cylinder block as shown in the illustration.
Specifications
...See also:
Non-turbo models
Non-turbo models
1) Connector
2) Clip
3) Clamp
4) Air intake boot
5) Clip
1. Unplug the connector that is attached
to the top of the air cleaner case.
2. Detach the connector cable from ...
Jump Starting
For more information about the vehicle battery, see Battery on page 10‑26.
Jump starting can be used on vehicles with run&-down batteries by using jumper
cables and another vehicle.
WARN ...
Certification for wireless remote control (vehicles without smart keysystem)
For vehicles sold in the U.S.A.
FCC ID: HYQ12BDC
FCC ID: HYQ13BDC
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device ...