Subaru Forester: Vehicle Dynamics Control operation indicator light
The indicator light flashes during activation of the skid suppression function and during activation of the traction control function.
NOTE
- The light may remain illuminated for
a short period of time after the engine
has been started, especially in cold
weather. This does not indicate the
existence of a problem. The light
should turn off as soon as the engine
has warmed up.
- The indicator light illuminates when the engine has developed a problem and the CHECK ENGINE warning light/ malfunction indicator lamp is on.
The Vehicle Dynamics Control system is probably malfunctioning under the following condition. Have your vehicle checked at a SUBARU dealer as soon as possible.
- The light does not turn off even after the lapse of several minutes (the engine has warmed up) after the engine has started.
Vehicle Dynamics Control warning light
The Vehicle Dynamics Control system provides its ABS control through the electrical circuit of the ABS system. Accordingly, if the ABS is inoperative, the Vehicle Dynamics Control system ...Vehicle Dynamics Control OFF indicator light
The light illuminates when the Vehicle Dynamics Control OFF switch is pressed to deactivate the Vehicle Dynamics Control system. The Vehicle Dynamics Control system is probably malfunctio ...See also:
Switching off the engine with the vehicle moving
It is not advisable to switch
off the
engine while the vehicle is moving.
However, should such a situation
arise, then the following procedure
applies.
- Press and hold the engine START/STOP
...
Remote Keyless Entry (RKE) System
The Remote Keyless Entry (RKE) transmitter will work up to 60m(195 ft) away from
the vehicle.
Press this button to extend the key. The key can be used for the ignition and
all locks.
: Press ...
Recommended cold tire inflation pressure
For recommended cold tire inflation
pressure for your vehicle’s tires,
refer to “Tires”. ...