Range Rover Evoque: Using the touch screen
Always run the engine during
prolonged
use of the touch screen. Failure to do so
may discharge the vehicle battery,
preventing the engine from starting.
Avoid spilling or splashing liquids onto
the touch screen.
Switching on
- Switch on the ignition.
- Switch on the touch screen.
The most recently used audio source
controls will be displayed (e.g. Radio, CD
etc.).
- Select HOME MENU.
- Select a source.
Note: Available sources will depend upon
options selected at time of purchase.
READ NEXT:
Some touch screen display icons are displayed
on subsequent screens and may not all be
displayed at the same time, e.g.
Back soft key: Touch to return to
the previous screen displayed.
Some menus and control screens will appear
as pop-ups, overlaying the current screen.
Warning and information pop-ups may also
appear on the display. Take notice of any
warnings and follow any on-
Press the hard key at any time to move from
the current display to the Home menu.
SEE MORE:
Control Diagram
NOTE: A = Hardwired; D = High Speed CAN (controller area network) bus; N =
Medium Speed CAN bus; O = LIN
(local interconnect network) bus
DW12C is shown, GTDi is similar
Battery
Blower motor
LH (left-hand) temperature blend stepper motor
Windshield distribution (defrost) stepp
Removal
NOTES:
The inner quarter panel and wheelhouse is manufactured from mild steel.
The aid of a second technician is required to remove, offer up and align the
inner quarter panel and wheelhouse.
The service panel is not fully welded.
1. In this procedure, to make sure the vehicle is correctl
© 2011-2024 Copyright www.rrevoque.org