Jeep Liberty: Using Automatic Mode
Press the switch rearward and release it within one-half second and the Sky Sliderâ„¢ will open from the front and move automatically toward the rear of the vehicle.
Press the switch forward and release it within one-half second and the Sky Sliderâ„¢ will open from the rear and move automatically toward the front of the vehicle.
NOTE:
• During operation, any movement of the Sky Slider™
switch will stop the Sky Sliderâ„¢ roof.
• To resume the operation from a partially open position, press and release the switch a second time.
• The Sky Slider™ will not open from the front and the rear at the same time. The Sky Slider™ must close fully before opening it from the opposite end.
Using Operator Mode
Press the switch rearward and hold it, the Sky Sliderâ„¢ will open from the front and move toward the rear of the vehicle. Press the switch forward and hold it, the Sky Sliderâ„¢ will open from ...See also:
Loading guidelines
WARNING
Always fasten items being carried as securely as possible using cargo tie-down
rings and fastening materials appropriate for the weight and size of the load.
In an accident, during ha ...
Indicator lights
All-Wheel Drive (AWD) LOCK indicator light (AWD model)
This light illuminates when the ignition switch is
turned to the ON position, and turns off within 1
second.
When selecting the LOCK mode ...
Replacing LATCH System Parts After a Crash
WARNING
A crash can damage the LATCH system in the vehicle. A damaged LATCH system may
not properly secure the child restraint, resulting in serious injury or even death
in a crash. To help make ...