Subaru Forester: Using a warm water washer - Washing - Exterior care - Appearance care - Subaru Forester Owner's ManualSubaru Forester: Using a warm water washer

- Keep a good distance of 12 in (30 cm) or more between the washer nozzle and the vehicle.

- Do not wash the same area continuously.

- If a stain will not come out easily, wash by hand. Some warm water washers are of the high temperature, high pressure type, and they can damage or deform the resin parts such as moldings, or cause water to leak into the vehicle.

    Washing the underbody
    Chemicals, salts and gravel used for deicing road surfaces are extremely corrosive, accelerating the corrosion of underbody components, such as the exhaust system, fuel and brake lines, brake ...

    Waxing and polishing
    Always wash and dry the vehicle before waxing and polishing. Use a good quality polish and wax and apply them according to the manufacturer’s instructions. Wax or polish when the painted su ...

    See also:

    Decreasing cruise speed
    To reduce cruising speed, press and hold control (4). Release the switch when the desired speed is reached, the new speed will be set and maintained. The set speed can be decreased in steps of 2k ...

    Menu list of the Bluetooth® audio/phone
    ■Bluetooth® audio/phone system functions Depending on the Bluetooth® device, certain functions may not be available. ...

    Safety
    WARNING! • Improperly inflated tires are dangerous and can cause collisions. • Under-inflation increases tire flexing and can result in over-heating and tire failure. • Over-inflation re ...