GMC Terrain: Turn Signals When Towing a Trailer - Driving Characteristics and Towing Tips - Towing - Driving and Operating - GMC Terrain Owner's ManualGMC Terrain: Turn Signals When Towing a Trailer

The turn signal indicators on the instrument panel flash whenever signaling a turn or lane change. Properly hooked up, the trailer lamps also flash, telling other drivers the vehicle is turning, changing lanes or stopping.

When towing a trailer, the arrows on the instrument panel flash for turns even if the bulbs on the trailer are burned out. Check occasionally to be sure the trailer bulbs are still working.

    Making Turns
    Notice: Making very sharp turns while trailering could cause the trailer to come in contact with the vehicle. The vehicle could be damaged. Avoid making very sharp turns while trailering. When tu ...

    Driving on Grades
    Reduce speed and shift to a lower gear before starting down a long or steep downgrade. If the transmission is not shifted down, the brakes might have to be used so much that they would get hot and ...

    See also:

    Sand
    This program should be used for terrain which is predominantly soft dry sand or deep gravel. Note: If the vehicle is unable to gain traction in extremely soft, dry sand, switching DSC off may h ...

    To Play a CD
    To play CDs, the ignition switch must be in the ACCESSORY (I) or ON (II) position. You operate the CD changer with the same controls used for the indash disc player or the radio. To select ...

    12-volt sockets
    12-volt socket in the front tunnel console 12-volt socket in the rear center console The electrical sockets can be used for 12-volt accessories such as cell phone chargers and coolers. For t ...