Toyota RAV4: Turn signal lever
1 Right turn
2 Left turn
3 Move and hold the lever
partway to signal a lane
change.
The right hand signal will flash
until you release the lever.
4 Move and hold the lever
partway to signal a lane
change.
The left hand signal will flash
until you release the lever.
■Turn signals can be operated when
Vehicles without smart key system
The engine switch is in the “ON” position
Vehicles with smart key system
The “ENGINE START STOP” switch is in IGNITION ON mode.
■If the indicators flash faster than usual
Check that a light bulb in the front or rear turn signal lights has not burned out.
Automatic transmission
Select a shift position appropriate for the driving conditions.
■ Shifting the shift lever
4-speed models
5-speed models
Vehicles without smart key system:
While the engine switch is ...
Parking brake
1 Sets the parking brake
Fully apply the parking brake while depressing the brake pedal.
2 Releases the parking brake
Slightly raise the lever and lower it completely while pressing the button. ...
See also:
Right control panel
Back button
...
When to Inspect the Engine Air Cleaner/Filter
Inspect or replace the air cleaner/ filter at the scheduled maintenance intervals.
See Maintenance Schedule on page 11‑3 for more information. If driving in dusty/dirty
conditions, inspect t ...
Inflating your tires
Safe operation of your vehicle requires that your tires are properly
inflated. Remember that a tire can lose up to half of its air pressure
without appearing flat.
Every day before you drive, che ...
