Subaru Forester: Tripped sensor identification
The security indicator light flashes when the alarm system has been triggered.
Also, the number of flashes indicates the location of unauthorized intrusion or the severity of impact on the vehicle.
When the ignition switch is turned to the “ON” position, the indicator light will light for 1 second and then flash as follows.
- When a door or rear gate was opened:
5 times
- When the ignition switch was turned to
the “ON” position: 3 times
- When a strong impact or multiple
impacts were sensed: twice (only vehicles
with shock sensors (dealer option))
- When a light impact was sensed: once
(only vehicles with shock sensors (dealer
option))
NOTE
Any of the above indicator light flashings
will recur each time the ignition
switch is turned to the “ON” position.
Rearming the alarm system cancels the flashing.
Disarming the system
To disarm the system, briefly press the “” button on the transmitter. ...Shock sensors (dealer option)
The shock sensors trigger the alarm system when they sense impacts applied to the vehicle and when any of their electric wires are cut. The alarm system causes the horn to sound and the turn ...See also:
Using the repair kit
Avoid skin contact with the
sealant
which contains natural rubber latex.
Do not unscrew the sealant bottle from
the receiver until it is empty, as
sealant will leak out.
If the tyre inflation ...
Rear center head restraint
Rear center head restraint
The center head restraint should be adjusted
according to the passenger's height. The
restraint should be carefully adjusted to support
the occupant's head.
• Pu ...
Headlights With Wipers (Available With Automatic Headlights Only)
When this feature is active, the headlights will turn on
approximately 10 seconds after the wipers are turned on
if the multifunction lever is placed in the AUTO position.
In addition, the headli ...