Jeep Liberty: Tread Wear Indicators
Tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced.
1 — Worn Tire
2 — New Tire
These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tire should be replaced.
CAUTION!
Proper operation of four-wheel drive vehicles depends
on tires of equal size, type and circumference
on each wheel. Any difference in tire size can cause
damage to the transfer case. Tire rotation schedule
should be followed to balance tire wear.
Tire Spinning
When stuck in mud, sand, snow, or ice conditions, do not
spin your vehicle’s wheels above 30 mph (48 km/h).
WARNING!
Fast spinning tires can be dangerous. Forces generated
by excessive wheel ...
Life Of Tire
The service life of a tire is dependent upon various
factors including but not limited to:
• Driving style
• Tire pressure
• Distance driven
WARNING!
Tires and the spare tire should b ...
See also:
Precautions against vehicle modification
To avoid accidental activation of the
system or rendering the system
inoperative, which may result in
serious injury, no modifications
should be made to any components
or wiring of the S ...
Tachometer
The red band in the tachometer indicates the engine's overrevving range.
Do not drive in the overrevving range, as this could damage the engine.
The fuel supply is interrupted to protect the ...
Air Bag Warning Light
You will want to have the air bags ready to
inflate for your protection in a collision. The
Air Bag Warning Light monitors the internal
circuits and interconnecting wiring associated
with ai ...
