Range Rover Evoque: Trailer levelling

To maintain vehicle stability, it is essential that the trailer is loaded so that it remains parallel to the ground. This is particularly important when towing twin axled trailers.

Vssential towing checks

READ NEXT:

 Trailer electrical connection

Connect only approved electrical circuits, which are in good condition, to the trailer socket. The vehicle connector provides a 5 amp output which must not be exceeded. An accessory harness ki

 Powered tailgate

When towing, ensure there is sufficient clearance before opening or closing the tailgate.

 Parking aids

The rear parking aids sensors are automatically disabled when a trailer with an approved electrical connector is connected. Note: Trailers fitted with LED lights will not disable the rear parking

SEE MORE:

 Rear Halfshaft LH

Special Tool(s) 205-857 Remover, Halfshaft 205-928 Remover, Half Shaft Inboard Joint Removal CAUTIONS: Nuts and bolts must be tightened with the weight of the vehicle on the suspension. Do not allow halfshafts to hang unsupported at one end or joint damage will occur. Make sure the halfshaft con

 Water Drain Panel Section

Removal NOTE: The water drain panel section is manufactured from mild steel. 1. The water drain panel section is replaced in conjunction with: Rear bumper cover Tailgate Quarter panel Rear lamp mounting panel 2. For additional information relating to this repair procedure please see the foll

© 2011-2024 Copyright www.rrevoque.org