Volvo XC60: Traction control (TC) - Introduction - Stability system - Comfort and driving pleasure - Volvo XC60 Owner's ManualVolvo XC60: Traction control (TC)

This function is designed to help reduce wheel spin by transferring power from a drive wheel that begins to lose traction to the wheel on the opposite side of the vehicle (on the same axle).

TC is most active at low speeds.

This is one of DSTC's permanent functions and cannot be switched off.

    Introduction
    The Dynamic Stability and Traction Control system (DSTC) consists of a number of functions designed help reduce wheel spin, counteract skidding, and to generally help improve directional stabi ...

    Active Yaw Control (AYC)
    This function helps maintain directional stability, for example when cornering, by braking one or more of the wheels if the vehicle shows a tendency to skid or slide laterally. This is one of D ...

    See also:

    If you have a flat tire (vehicles with run-flat tires)
    Take your vehicle to the nearest Toyota dealer or authorized tire dealer as soon as possible. ■ Run-flat tires (A “RFT” or “DSST” mark is molded on the sidewall) You can continue ...

    Battery
    - Keep the battery surface clean and dry. Clean the battery with a solution of baking soda and water. - Make certain the terminal connections are clean and securely tightened. - If the vehicle ...

    Setting a warning distance
    This setting determines the distance at which the visual and audible warnings are triggered. Select Long, Normal or Short by pressing MY CAR on the center console control panel and going to Set ...