Mitsubishi Outlander: Tools and jack
Storage
The tools and jack are stowed on the right side of the luggage area. The storage location of the tools and jack should be remembered in case of an emergency.
1- Jack. 2- Tools.
Tools
1- Tool case. 2- Wheel nut wrench. 3- Jack bar. 4- Towing hook.
Jack
To remove
1. Turn the knob (A) anticlockwise and remove the lid (B).
2. Remove the fastening band (C) and remove the tools.
3. Retract the jack and remove it from its installation fitting (D).
To store
1. Retract the jack, then return it to its original position. 2. Extend the jack and firmly secure it.
3. Return the tools to the tool bag, return it to its original position, and firmly fasten with the fastening band. 4. Install the lid and turn the knob clockwise.
Engine overheating
When the engine has overheated, the information screen in the multi-information
display will be interrupted and the engine coolant temperature warning display will
appear. The screen will then cha ...
How to change a tyre
Before changing a tyre, first stop your vehicle in a safe, flat location. 1.
Park the vehicle on level and stable ground, free of loose pebbles, etc.. 2. Set
the parking brake firmly. 3. Turn the ...
See also:
High-beam headlamps (halogen headlamps)
Switch off the lights.
Open the hood.
Remove the headlamp cover ().
Left-hand headlamp: detach the washer fluid reservoir ().
Turn housing cover 1 counter-clockwise and pull it out.
Pre ...
Trailer hitch - australia only
When selecting a drawbar for the receiver, the
following dimensions must be adhered to:
A. The maximum recommended drawbar
length is 178mm (7 in).
B. To achieve the maximum ball height, a
drawb ...
Ignition Switch Light
The ignition switch light comes on
when you open the driver’s door. It
fades out in about 30 seconds after
the door is closed. ...
