Subaru Forester: To use as full-automatic climate control system
1. Place the temperature control dial in the position for the preferred temperature.
2. Set the airflow control dial and fan speed control dial in the “AUTO” position.
The system’s functions will then switch to AUTO mode and be controlled automatically.
- Airflow control dial: AUTO position
- Fan speed control dial: AUTO position
Control panel
Control panel 1) Temperature control dial 2) Fan speed control dial 3) Airflow control dial 4) Control switch of the defogger and deicer system (Refer to “Defogger and deicer”.) 5) Ai ...To use as semi-automatic climate control system
Each function can be individually set to AUTO mode independently of the others. Any function set to AUTO mode is controlled automatically. Any function not set to AUTO mode can be manually adju ...See also:
Audio volume and automatic volume control
The infotainment system compensates for disrupting
noises in the passenger compartment
by increasing the volume according to the
speed of the vehicle. The level of sound compensation
can be se ...
Recreational towing (behind motorhome, etc.)
Two-Wheel Drive Models
All Four Wheels On The Ground
Recreational towing is allowed ONLY if the driveshaft is
removed. Towing with the rear wheels on the ground
while the driveshaft is connected ...
Remote Keyless Entry (RKE)
This system allows you to lock or unlock the doors and
liftgate, open the liftgate flip-up window, or activate the
PANIC alarm from distances up to approximately 66 ft
(20 m) using a hand-held R ...