Subaru Forester: To hook the top tether
1. Remove the headrest at the windowside seating position where the child restraint system has been installed with the lower anchorages or seatbelt; lift up the headrest while pressing the release button. Store the headrest in the cargo area. Avoid placing the headrest in the passenger compartment to prevent it from being thrown around in the passenger compartment in a sudden stop or a sharp turn.
2. For both window-side seating positions, remove the cover for the appropriate upper anchorage.
3. Attach the child restraint top tether hook to the appropriate upper anchorage.
4. Tighten the top tether securely.
Please contact your SUBARU dealer if you have any question regarding the installation of a child restraint system.
Always remove the headrest when mounting a child restraint system with a top tether. Otherwise, the top tether cannot be fastened tightly.
Anchorage location
1) For right seat 2) For center seat 3) For left seat There is an anchorage located on the rear edge of the ceiling above each seating position. ...SRS airbag (Supplemental Restraint System airbag)
*SRS: This stands for supplemental restraint system. This name is used because the airbag system supplements the vehicle’s seatbelts. Your vehicle is equipped with a crash sensing and diagn ...See also:
Connecting iPod®
To connect an iPod® to the vehicle so that the
iPod® can be controlled with the audio system
controls and display screen, use the USB jack
located in the center console. Open the
protectiv ...
Headlamp control
Rotate the headlamp control to the
first position to turn on the
parking lamps.
Rotate to the second position
to
turn on the headlamps.
Rotate back to to turn the
headlamps off.
...
Engine Block Heater (if equipped)
Engine Block
Heater (if equipped)
The engine block heater will help you start the engine more easily in very cold
weather (–18°C (0°F) or below). To use the engine block heater: 1) Turn off ...